 |
TECHNICAL INFORMATION |
| Battery Model No.: |
3-EV-210, 3-D-210 |
| Nominal Voltage: |
6V |
| Capacity |
Amp@5hr |
210Ah |
| Amp@3hr |
175Ah |
| Reserve Capacity |
At 25Amp |
530 min |
| At 75Amp |
145min |
| Weight |
Dry without Acid |
26Kg with 3% more or less |
| Total with Acid |
33.8KG with 5% more or less |
| Length[mm] |
260 |
| Width[mm] |
182 |
| Height[mm] |
308 |
| Component |
Positive plate |
Negative plate |
Container |
Vent Cap |
Terminal |
Electrolyte |
Separator |
| Material/Type |
Lead dioxide |
Lead |
Polypropylene |
Yes |
Lead Screw |
Sulfuric acid |
AGM (Absorbent Glass Mat) |
| Western Electrical EV Series Deep Cycle Golf Cart Batteries: |
If there is one thing we should know about the golf cart, it's that the golf cart battery must be able to deliver consistent performance day in and day out. That is why Western Electrical builds this EV series deep cycle golf cart batteries to provide the rugged durability, outstanding performance and long life that you have come to expect.
Engineered specifically to handle the rigors of continuous discharge and recharge, and with the clear purpose to deliver superior performance, durability and reliability, these batteries are manufactured by utilize the highest quality components, higher-density active material plates and optimized internal current flow design to enable them to withstand the stresses of deep cycling and meet the challenges of the toughest, hilliest courses in the battery world, no matter it's for golf cart, utility vehicle and low-speed passenger vehicle, as well as hunting buggies.
• Very thick positive and negative plates.
• Special plate design for improved active mass adhesion and improved conduction.
• Innovative separators.
• Electrolyte: diluted sulphuric acid.
• Casing material: polypropylene.
• Special, patented active mass composition.
| Batteries Series Specification |
|
• The battery consists of high-performance paste plate, compound low resistance separators, high-impact resistant polypropylene plastic tank.
• Positive plates of lead-based alloy with multiple, high-density lead paste processing, manufacturing, corrosion resistance, high-rate discharge capacity, good durability.
• Negative plates with a special formulation and double paste process, excellent low temperature discharge, charge acceptance ability, anti-sulfate and anti-off performance.
• Tight assembly, through partition connectors, discharge stable, safe and reliable.
• Adaptability to temperature range from -40°C to 60°C under normal use.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}